Air Compressor Inspection Checklist
An Air Compressor Inspection Checklist helps technicians perform routine maintenance to ensure the compressor runs efficiently, safely, and within manufacturer specifications.
Start Free With This Template
Create your free Workyard account to customize and use this template — no credit card needed.
Categories
With Workyard, you can
- Digitize any form so your crew can complete them on the go
- Automate compliance by requiring forms at clock-in/clock-out
- Keep your business audit-ready with GPS-verified, time-stamped logs
- Protect crews with instant alerts on flagged answers
Air Compressor Inspection Checklist
Please complete the inspection checklist for the air compressor.
Inspection Items
Lubrication & Filters
Oil Level: Check that lubricant oil level is within the safe range (via sight glass or dipstick) and no obvious oil leaks. Ensures proper lubrication to prevent motor wear and costly breakdowns
Air Intake Filter: Inspect the air filter element; ensure it’s clean and intact (not clogged or damaged).
Coolant level: if applicable, check coolant level in radiator or tank.
| Pass | Fail | N/A | |
|---|---|---|---|
| Oil Level | |||
| Air Intake Filter | |||
| Coolant level |
Notes
Lubricant or oil change recommended?
Electrical & Motor
Electrical Connections
Visually inspect wiring, connectors, and terminals for secure connections, no exposed wires, and no signs of overheating (no discoloration or melted insulation). Secure, intact connections prevent electrical faults and hazards.
- Clear
No data to display
Motor Operation
Run the compressor briefly and listen for any unusual noises or vibrations from the motor or pump. Verify the motor runs smoothly without overheating.
- Clear
No data to display
Motor Safety Devices
Check that motor overload protectors or alarms (if equipped) haven’t tripped and are functioning.
- Clear
No data to display
Pressure & Safety Devices
Pressure Gauge Reading
Note the system pressure on the gauge (psi or kPa) and ensure it is within normal operating range.
Pressure Switch Cut-off
Confirm the compressor cuts off at the intended maximum pressure and resumes at the cut-in pressure (pressure switch operates correctly).
- Clear
No data to display
Safety Relief Valve
Verify a spring-loaded safety relief valve is installed and unobstructed. If due for periodic test, carefully test its operation (momentarily lift or open it) to ensure it releases pressure properly.
- Clear
No data to display
Secondary Safety Controls
Check other safety shutdowns or alarms (e.g. high temperature shut-off, emergency stop) if the compressor has them.
- Clear
No data to display
Condensate Drains & Air Lines
Tank Condensate Drain
Drain the receiver tank’s condensate (water/oil) via the drain valve at the bottom. Ensure the drain valve itself is functioning (no blockage).
- Clear
No data to display
Moisture Traps/Drains (if equipped)
Drain the receiver tank’s condensate (water/oil) via the drain valve at the bottom. Ensure the drain valve itself is functioning (no blockage).
- Clear
No data to display
Air Leaks Detected?
- Clear
No data to display
Air Lines & Hoses Condition
Inspect distribution lines and hoses for damage, cracks, or abrasion. Ensure connections are tight and support/anchors are secure.
- Clear
No data to display
General Safety & Housekeeping
| Pass | Fail | N/A | |
|---|---|---|---|
| All safety guards & covers in place | |||
| Emergency Stop switch test | |||
| Compressor is clean | |||
| Compressor is ventilated & free from obstructions |
Other (describe)
Mounting & Vibration
Check that the compressor is firmly mounted or bolted in place, and any vibration isolators are intact.
- Clear
No data to display
Sample data shown
Overview
FAQ
See more templates
About this template
An Air Compressor Inspection Checklist is a tool for technicians or facilities personnel to track and perform routine inspections and upkeep on air compressor systems. The checklist may cover filters, lubrication, pressure checks, electrical connections, drain valves, and air lines.
This form helps avoid costly repairs, reduce system downtime, and ensure safe operation. It may also support compliance ( OSHA, ANSI).
Fields may include:
- Oil levels, filter condition, and belt tension
- Leak detection and system pressure
- Motor and electrical connection checks
- Technician name and maintenance notes
Regular maintenance detects motor issues or leaks early, improves compliance and compressor efficiency.
Using this checklist can extend compressor lifespan and minimize performance interruptions.